plastic injection moulding,injection mould,die casting mould|
Newsletter
Sign Up for Our Newsletter:
More information
Our promise: we will reply in 24 hours upon receiving your inquiry

Tel:86-769-8554-4196

How to solve the problem on deformation of injection product?
Upadta time:2012-11-23 0:39:19
We have analysed the deformation reasons of injection product before. We had found out the deformation reason, so what action should be taken to solve this problem?
 
1.product deformation is due to the insufficient cooling, we can add the water line and increase the waterway to improve the deformation.
 
2.product deformation is due to the uneven ejection force, we need to modify and adjust the number of ejector pin and position to improve the deformation.
 
3.product deformation is due to the severe shrinkage, we need to improve the shrinkage of product. If the shrinkage improved, and then the injection product deformation improved.
 
4.product deformation is due to the product structure, we only to modify the product structure and mold structure to improve.
 
5.we also need to adjust the injection molding parameter aspect, such as to adjust the dwell time,cooling time, injection pressure and time.
 
Recommend  to read:appliance injection  mold

Professional injection mold,die casting mold,plastic products OEM manufacturer.

With more than 20 years industrial experience in the field of  injection mold and die casting mold, we can provide  the one-stop service including design and development, mold fabrication, production, products processing etc.

.

Dongguan Yongsheng Hardware Plastics Product Co.,Ltd All rights reserved
Fax number: +86-769-8534 4896 Customer service hotine: +86-769-8554 4196 Email:
Xin an Community,Chang an,Dongguan City,Guangdong Province,China.
Keywords: injection molding,injection mould,die casting mold,plastic products,die casting products|,mold manufacturer
©